Air Launcher Model Rocket

1 views

Bounding box: 203.4 × 79.8 × 574.5 mm
Engine: 3D Printing B-rep
Parameters: 21
Published: November 8, 2026

Download

Free to download and use. See the terms.

The prompt

The fins don't export to their correct dimesions fix this.

Parameters

Name	Value	Range
Lower base outer diameter	20.5 mm	15 – 30
Lower base height	45 mm	20 – 80
Upper body outer diameter	30 mm	20 – 50
Upper body height	404.5 mm	100 – 600
Tube wall thickness	1.6 mm	1 – 3
Nose cone base diameter	30 mm	20 – 50
Nose cone height	125 mm	50 – 200
Shoulder insert length	20 mm	10 – 40
Fit clearance	0.25 mm	0.1 – 0.5
Number of fins	4 mm	3 – 6
Fin thickness	2 mm	1.2 – 4
Fin base offset from bottom	5 mm	0 – 30
Small fin span	16 mm	8 – 40
Small fin root chord	20 mm	10 – 60
Small fin tip chord	7 mm	3 – 30
Medium fin span	21 mm	8 – 50
Medium fin root chord	26 mm	10 – 70
Medium fin tip chord	9 mm	3 – 30
Large fin span	27 mm	8 – 60
Large fin root chord	32 mm	10 – 80
Large fin tip chord	11 mm	3 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS