Air Launcher Model Rocket

1 views

Bounding box: 100 × 100 × 550 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

also I will be swapping out different fin sizes that I have already created can you integrate a way to be able to swap out the fins?

Parameters

Name	Value	Range
Lower base outer diameter	20.5 mm	15 – 30
Lower base height	20.5 mm	10 – 50
Upper body outer diameter	30 mm	20 – 50
Upper body height	404.5 mm	100 – 600
Tube wall thickness	1.6 mm	1 – 3
Nose cone base diameter	30 mm	20 – 50
Nose cone height	125 mm	50 – 200
Shoulder insert length	20 mm	10 – 40
Fit clearance	0.25 mm	0.1 – 0.5
Number of fins	4 mm	3 – 6
Fin span from body	35 mm	20 – 60
Fin root chord	70 mm	30 – 100
Fin tip chord	25 mm	10 – 50
Fin thickness	2 mm	1.2 – 4
Fin base offset from bottom	5 mm	0 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS