Brackets and mounts
AI Camera Enclosure Multi-Part Assembly
- Bounding box
- 5315.0 × 195.0 × 131.8 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
Design a commercial-grade outdoor AI sports vision camera enclosure for permanent installation on tennis, badminton, volleyball and basketball court poles. Overall Dimensions: • Width: 240 mm • Height: 120 mm • Depth: 90 mm • Wall Thickness: 3 mm Material: • Die-cast Aluminum ADC12 • Matte Black Powder Coat Finish • IP65 Weatherproof • Stainless Steel Fasteners Front Panel: • Two recessed circular camera openings • Camera opening diameter: 28 mm • Camera spacing: 130 mm center-to-center • Cameras protected by one continuous 4 mm AR-coated tempered glass window • Small status LED centered between both cameras • Ambient light sensor beside LED • Slight 5° downward front inclination to reduce water accumulation Camera Mounts: • Two independent Sony IMX296 camera modules • Adjustable pan ±15° • Adjustable tilt ±10° • Locking mechanism using stainless steel socket screws • Internal FFC cable routing • Cable strain relief • Camera optical axis overlap of approximately 10% Internal Layout: Provide mounting bosses for a 170 × 120 mm PCB. Include simplified component envelopes for: • RK3588S Processor • Two LPDDR4X Memory ICs • NVMe M.2 SSD • RTL8211F Ethernet PHY • PoE Power Section • Dual 22-pin Camera FFC Connectors • Wi-Fi Module PCB mounted on four M3 brass standoffs with 10 mm height. Maintain minimum 8 mm clearance from enclosure walls. Thermal Design: Passive cooling only. RK3588S mounted beneath an aluminum heat spreader. Thermal pad connects processor to enclosure top. Top cover acts as heatsink. Include 10 external cooling fins: • Height: 8 mm • Thickness: 3 mm • Spacing: 6 mm Rear Panel: • Waterproof RJ45 Gigabit Ethernet with PoE • USB-C service connector with rubber cover • Waterproof pressure equalization vent • Reset pinhole • Cable strain relief • Product label recess Pole Mount: Integrated heavy-duty aluminum clamp. Supports pole diameters from 60 mm to 100 mm. Four stainless steel M6 bolts. Rubber anti-slip inserts. Pan adjustment ±30°. Tilt adjustment ±20°. Serrated locking teeth to prevent movement. Internal cable routing toward the pole. Environmental Features: • Silicone perimeter gasket • Drain channels • Rounded edges • Internal reinforcing ribs • Uniform wall thickness • Suitable for die casting • 2° draft angle • No undercuts Serviceability: Top cover removable using eight M4 stainless steel screws. PCB removable independently. Camera modules individually replaceable. SSD accessible after removing top cover. Generate: • Isometric view • Front view • Side view • Rear view • Top view • Bottom view • Cross-sectional view • Transparent cutaway view • Exploded assembly • Pole-mounted assembly • Internal component layout • Camera adjustment mechanism Style: Modern industrial machine-vision camera. Professional OEM product. Manufacturable, serviceable, compact, passive cooled. No hobbyist or development-board appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 300 mm | 200 – 600 |
| Enclosure Width | 240 mm | 200 – 300 |
| Enclosure Depth | 90 mm | 70 – 120 |
| Enclosure Height | 120 mm | 100 – 150 |
| Wall Thickness | 3 mm | 2 – 5 |
| Window Width | 180 mm | 150 – 220 |
| Window Height | 70 mm | 50 – 100 |
| Glass Thickness | 4 mm | 2 – 6 |
| Camera Spacing | 130 mm | 100 – 160 |
| Camera Aperture Diameter | 28 mm | 20 – 35 |
| Camera Module Length | 30 mm | 20 – 50 |
| PCB Width (X) | 170 mm | 150 – 200 |
| PCB Depth (Y) | 80 mm | 60 – 100 |
| PCB Thickness | 1.6 mm | 1 – 2.4 |
| Standoff Height | 10 mm | 6 – 15 |
| Heatsink Base Thickness | 3 mm | 2 – 5 |
| Fin Height | 8 mm | 4 – 15 |
| Fin Thickness | 3 mm | 1.5 – 5 |
| Fin Spacing | 6 mm | 3 – 10 |
| Fin Count | 10 | 4 – 20 |
| Spreader Width | 50 mm | 30 – 80 |
| Spreader Depth | 50 mm | 30 – 80 |
| Spreader Height | 8 mm | 4 – 15 |
| Gasket Thickness | 2 mm | 1 – 4 |
| Pole Diameter | 75 mm | 60 – 100 |
| Clamp Width | 80 mm | 60 – 120 |
| Clamp Depth | 60 mm | 40 – 100 |
| Clamp Height | 30 mm | 20 – 50 |
| I/O Panel Width | 60 mm | 40 – 100 |
| I/O Panel Height | 30 mm | 20 – 50 |
| I/O Panel Depth | 5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent