Brackets and mounts
Agricultural Robot Prototype
- Bounding box
- 825.0 × 540.0 × 455.6 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model into a realistic human-designed agricultural prototype. Keep: 4 wheels, compact chassis, rear-center mast, camera, sensor module, farmer display and soil probe. Fix: - Enclose the open frame with a simple dark sheet-metal/aluminum chassis. - Use 160 mm wheels with realistic axles/brackets. - Replace thick mast with slim 25×25 mm aluminum square tube. - Make the top unit a small camera with visible lens, angled downward toward crops. - Make the sensor a small ventilated temperature/humidity/light housing. - Make the front display a 5–7 inch angled touchscreen facing the farmer. - Connect the soil-moisture probe to the chassis with a visible cable and clips. - Add realistic bolts, brackets, mounting plates and cable management. - Keep battery/Raspberry Pi/ESP32 inside the enclosure. - Keep optional small irrigation pump; no large water tank. Style: simple, rugged, manufacturable college engineering prototype; matte dark gray with natural aluminum. No futuristic styling, tracks, robotic arms, LiDAR or autonomous-navigation parts. Final view: clean 3/4 isometric, realistic and mechanically believable.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 600 mm | 400 – 800 |
| Chassis Width | 400 mm | 300 – 600 |
| Chassis Height | 200 mm | 150 – 300 |
| Baseplate Thickness | 5 mm | 3 – 10 |
| Frame Profile Size | 25 mm | 20 – 40 |
| Wheel Diameter | 160 mm | 120 – 200 |
| Wheel Width | 40 mm | 30 – 60 |
| Axle Radius | 8 mm | 5 – 12 |
| Wheel Offset X | 80 mm | 50 – 150 |
| Wheel Side Offset | 30 mm | 10 – 60 |
| Wheel Bracket Width | 30 mm | 20 – 50 |
| Wheel Bracket Height | 60 mm | 40 – 80 |
| Mast Height | 400 mm | 300 – 600 |
| Mast Diameter | 25 mm | 20 – 40 |
| Mast Wall | 3 mm | 2 – 5 |
| Camera Width | 60 mm | 40 – 100 |
| Camera Depth | 40 mm | 30 – 60 |
| Camera Height | 40 mm | 30 – 60 |
| Camera Tilt (deg) | 20 deg | 0 – 45 |
| Sensor Width | 80 mm | 60 – 120 |
| Sensor Depth | 60 mm | 40 – 80 |
| Sensor Height | 50 mm | 30 – 70 |
| Display Width | 150 mm | 120 – 180 |
| Display Height | 90 mm | 70 – 110 |
| Display Thickness | 15 mm | 10 – 25 |
| Display Tilt (deg) | 30 deg | 0 – 60 |
| Display Mount Height | 180 mm | 120 – 250 |
| Probe Length | 150 mm | 100 – 200 |
| Probe Diameter | 12 mm | 8 – 20 |
| Probe Handle Width | 30 mm | 20 – 50 |
| Cable Coil Radius | 30 mm | 20 – 50 |
| Cable Diameter | 6 mm | 4 – 10 |
| Enclosure Length | 300 mm | 200 – 400 |
| Enclosure Width | 200 mm | 150 – 300 |
| Enclosure Height | 80 mm | 60 – 120 |
| Pump Width | 60 mm | 40 – 80 |
| Pump Height | 40 mm | 30 – 60 |
| Pump Depth | 40 mm | 30 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent