Brackets and mounts
Agricultural Field Robot Prototype
- Bounding box
- 500.0 × 440.0 × 353.5 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
Final refinement only. Keep the existing chassis and 4-wheel design. Make the camera clearly visible with a small lens, mounted at the top of the mast and angled downward toward crops. Make the front farmer display clearly visible as a 5–7 inch angled touchscreen facing the operator. Make the soil-moisture probe vertical/downward and connect it to the chassis with a visible flexible cable. Make the middle sensor a small ventilated temperature/humidity/light sensor housing. Add realistic wheel axles, brackets, bolts and cable clips. Keep the electronics and battery enclosed inside the body. Use matte dark-gray body panels with natural aluminum brackets/frame. Do not change the overall dimensions or add new futuristic components. Final result must look like a simple, rugged, human-built college engineering prototype for agricultural field deployment.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 400 mm | 300 – 500 |
| Chassis Width | 300 mm | 200 – 400 |
| Chassis Height | 200 mm | 150 – 300 |
| Baseplate Thickness | 8 mm | 4 – 15 |
| Frame Profile Size | 20 mm | 10 – 40 |
| Wheel Diameter | 160 mm | 100 – 250 |
| Wheel Width | 40 mm | 20 – 80 |
| Axle Radius | 8 mm | 4 – 15 |
| Wheel Offset X | 30 mm | 10 – 60 |
| Wheel Side Offset | 30 mm | 10 – 60 |
| Wheel Bracket Width | 30 mm | 15 – 50 |
| Wheel Bracket Height | 40 mm | 20 – 80 |
| Mast Height | 300 mm | 200 – 500 |
| Mast Diameter | 30 mm | 15 – 60 |
| Mast Wall Thickness | 3 mm | 1 – 8 |
| Camera Width | 40 mm | 20 – 80 |
| Camera Depth | 30 mm | 15 – 60 |
| Camera Height | 30 mm | 15 – 60 |
| Camera Tilt (deg) | 30 deg | 0 – 60 |
| Sensor Enclosure Width | 60 mm | 30 – 100 |
| Sensor Enclosure Depth | 40 mm | 20 – 80 |
| Sensor Enclosure Height | 40 mm | 20 – 80 |
| Display Width | 180 mm | 120 – 250 |
| Display Height | 120 mm | 80 – 180 |
| Display Thickness | 15 mm | 5 – 30 |
| Display Tilt (deg) | 30 deg | 0 – 60 |
| Display Mount Height | 180 mm | 100 – 300 |
| Probe Length | 120 mm | 60 – 200 |
| Probe Diameter | 12 mm | 6 – 25 |
| Probe Handle Width | 40 mm | 20 – 80 |
| Cable Diameter | 6 mm | 3 – 12 |
| Enclosure Length | 120 mm | 80 – 200 |
| Enclosure Width | 80 mm | 50 – 150 |
| Enclosure Height | 60 mm | 30 – 100 |
| Pump Width | 50 mm | 30 – 80 |
| Pump Height | 40 mm | 20 – 60 |
| Pump Depth | 30 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent