Brackets and mounts
Agricultural Field Prototype Chassis
- Bounding box
- 900.0 × 540.0 × 353.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
Improve the existing model without changing its basic 4-wheel chassis. Make it a realistic human-designed agricultural field prototype. Add a clearly visible small crop camera with lens at the top of the rear mast, angled downward toward crops. Add a small ventilated temperature/humidity/light sensor below the camera. Make the front component a proper 5–7 inch angled touchscreen facing the farmer. Add a detachable soil-moisture probe beside the machine, connected to the chassis by a visible cable. Keep four 160 mm wheels, but show realistic wheel axles and mounting brackets. Add a compact electronics/battery enclosure inside the chassis and realistic bolts, brackets and cable clips. Keep the mast slim aluminum square tube. Make the body slightly smaller and more compact, with dark gray sheet-metal panels and natural aluminum structure. Human-made college engineering prototype; rugged, simple and manufacturable. No futuristic robot, tracks, robotic arms or LiDAR. Create a clean 3/4 isometric view where the camera, sensor, display and soil probe are clearly visible.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 600 mm | 400 – 800 |
| Chassis Width | 400 mm | 300 – 600 |
| Chassis Height | 200 mm | 150 – 300 |
| Baseplate Thickness | 5 mm | 3 – 10 |
| Frame Profile Size | 25 mm | 20 – 40 |
| Wheel Diameter | 160 mm | 120 – 200 |
| Wheel Width | 40 mm | 30 – 60 |
| Axle Radius | 8 mm | 5 – 15 |
| Wheel Offset X | 80 mm | 50 – 120 |
| Wheel Side Offset | 30 mm | 10 – 60 |
| Wheel Bracket Width | 30 mm | 20 – 50 |
| Wheel Bracket Height | 60 mm | 40 – 100 |
| Mast Height | 300 mm | 200 – 500 |
| Mast Side Length | 25 mm | 20 – 40 |
| Mast Wall Thickness | 3 mm | 2 – 5 |
| Camera Width | 40 mm | 30 – 60 |
| Camera Depth | 40 mm | 30 – 60 |
| Camera Height | 30 mm | 20 – 50 |
| Camera Tilt (deg) | 30 deg | 0 – 60 |
| Sensor Enclosure Width | 80 mm | 60 – 120 |
| Sensor Enclosure Depth | 60 mm | 40 – 100 |
| Sensor Enclosure Height | 50 mm | 30 – 80 |
| Display Width | 180 mm | 150 – 220 |
| Display Height | 120 mm | 100 – 160 |
| Display Thickness | 15 mm | 10 – 25 |
| Display Tilt (deg) | 30 deg | 0 – 60 |
| Display Mount Height | 180 mm | 150 – 250 |
| Probe Length | 200 mm | 150 – 300 |
| Probe Diameter | 20 mm | 15 – 30 |
| Probe Handle Width | 50 mm | 40 – 80 |
| Cable Diameter | 8 mm | 5 – 15 |
| Enclosure Length | 200 mm | 150 – 300 |
| Enclosure Width | 150 mm | 100 – 200 |
| Enclosure Height | 80 mm | 60 – 120 |
| Pump Width | 60 mm | 40 – 100 |
| Pump Height | 50 mm | 30 – 80 |
| Pump Depth | 40 mm | 30 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent