Gears and transmission
AeroMorph-GD Wing-Morphing Gearbox (Exploded Multi-Body)
- Bounding box
- 1061.0 × 840.0 × 1625.0 mm
- Engine
- Precision B-rep
- Parameters
- 49
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create AeroMorph-GD complete parametric 3D assembly. Combine: 1. Gear Mechanism 2. Left Wing 3. Right Wing Units: mm Assembly: Motor → Pinion Gear → Main Gear → Output Shaft → Wing Hinge Key dimensions: - Motor: Ø28 × 30 - Pinion: Ø10 - Main Gear: Ø40 - Output Shaft: Ø6 × 50 - Bearing: Ø25 × 7 - Locking Plate: R30 × 5 - Locking Pin: Ø5 - Spar: Ø12 - Wing span: 1600 - Chord: 200 Locking positions: 0° / 10° / 20° Requirements: - Gear and shaft concentric - Main gear rigidly connected to output shaft - Wing rotates about hinge axis - Independent locking pin - No gear-based locking - Proper clearances - No interference - Parametric assembly - Fully editable parts Generate: - Complete 3D assembly - Exploded view - Front / Top / Side views - 0° / 10° / 20° configurations - Section view of gear mechanism - Section view of locking mechanism - Dimensioned engineering drawing - BOM Mark unverified dimensions: “PARAMETER TO BE VERIFIED”
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 30 mm | 5 – 200 |
| Motor Body Dia | 28 mm | 15 – 80 |
| Motor Body Length | 30 mm | 10 – 100 |
| Motor Mounting Flange Dia | 36 mm | 20 – 90 |
| Motor Flange Thickness | 4 mm | 1 – 20 |
| Motor Shaft Dia | 3 mm | 1 – 10 |
| Motor Shaft Length | 10 mm | 2 – 40 |
| Pinion Module | 1 mm | 0.5 – 3 |
| Pinion Tooth Count | 8 teeth | 6 – 24 |
| Pinion Face Width | 8 mm | 2 – 30 |
| Pinion Bore | 3 mm | 0.5 – 8 |
| Main Gear Module | 1 mm | 0.5 – 3 |
| Main Gear Tooth Count | 38 teeth | 20 – 90 |
| Main Gear Face Width | 10 mm | 2 – 40 |
| Main Gear Bore | 6 mm | 1 – 30 |
| Output Shaft Dia | 6 mm | 2 – 30 |
| Output Shaft Length | 50 mm | 15 – 200 |
| Shaft Key Flat Depth | 0.8 mm | 0.2 – 3 |
| Bearing Outer Dia | 25 mm | 8 – 80 |
| Bearing Bore | 6 mm | 1 – 40 |
| Bearing Width | 7 mm | 2 – 40 |
| Locking Plate Radius | 34 mm | 10 – 100 |
| Locking Plate Thickness | 5 mm | 1 – 20 |
| Detent Hole Circle Radius | 30 mm | 5 – 95 |
| Detent Hole Dia | 5.2 mm | 1 – 12 |
| Lock Position 1 | 0 deg | 0 – 90 |
| Lock Position 2 | 10 deg | 0 – 90 |
| Lock Position 3 | 20 deg | 0 – 90 |
| Locking Pin Dia | 5 mm | 1 – 15 |
| Locking Pin Length | 12 mm | 3 – 60 |
| Pin Head / Collar Dia | 9 mm | 2 – 25 |
| Pin Head Thickness | 3 mm | 1 – 15 |
| Wing Half Span | 800 mm | 100 – 3000 |
| Wing Root Chord | 200 mm | 30 – 800 |
| Wing Tip Chord | 120 mm | 10 – 700 |
| Wing Thickness | 20 mm | 2 – 80 |
| Spar Tube OD | 12 mm | 3 – 60 |
| Spar Tube ID | 9 mm | 1.5 – 55 |
| Spar Length | 1600 mm | 100 – 4000 |
| Hinge Block Width | 45 mm | 10 – 150 |
| Hinge Block Depth | 45 mm | 10 – 150 |
| Hinge Block Height | 30 mm | 5 – 120 |
| Hinge Shaft Bore | 6.2 mm | 1 – 40 |
| Housing Width (X) | 80 mm | 30 – 300 |
| Housing Depth (Y) | 80 mm | 30 – 300 |
| Housing Height (Z) | 50 mm | 15 – 250 |
| Housing Wall Thickness | 7 mm | 2 – 40 |
| Internal Cavity Depth | 40 mm | 3 – 240 |
| Output Shaft Through Bore | 6.4 mm | 1 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled