AeroMorph-GD UAV Wing (Dihedral 10 deg)

1 views

Bounding box: 200.0 × 1577.7 × 164.5 mm
Engine: Precision B-rep
Parameters: 18
Published: September 22, 2026

Download

Free to download and use. See the terms.

The prompt

YOU CAN CHANGE 10 DEGREE WITHOUT O DEGREE

Parameters

Name	Value	Range
Wing Chord	200 mm	100 – 400
NACA Max Camber	0.04 ratio	0 – 0.09
NACA Camber Position	0.4 ratio	0.2 – 0.7
NACA Thickness Ratio	0.12 ratio	0.06 – 0.2
Span per Wing	800 mm	200 – 1500
Dihedral Angle	10 deg	0 – 30
Spar Offset Behind LE	50 mm	10 – 150
Main Spar Diameter	12 mm	4 – 30
Hinge Line Offset Behind LE	150 mm	50 – 195
Hinge Hole Diameter	6 mm	2 – 20
Root Block Chord	60 mm	20 – 150
Root Block Width	40 mm	10 – 120
Root Block Thickness	12 mm	6 – 40
Aileron Span	300 mm	50 – 600
Aileron Chord	50 mm	15 – 100
Aileron Thickness	10 mm	2 – 25
Aileron Inboard Offset	460 mm	0 – 600
Aileron Leading Edge (from LE)	150 mm	50 – 195

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS