Gears and transmission
AeroMorph-GD UAV Wing (0° Dihedral)
- Bounding box
- 210.0 × 1600.0 × 25.7 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise parametric 3D CAD model of the AeroMorph-GD UAV wing in the 0° DIHEDRAL configuration. AIRFOIL: - NACA 4412 - Chord: 200 mm - Maximum thickness: 24 mm - Thickness ratio: 12% WING: - Total span: 1600 mm - Left wing: 800 mm - Right wing: 800 mm - Wing area: 0.32 m² - Dihedral: 0° - Both wings must remain perfectly horizontal and coplanar. STRUCTURE: - Main spar: Ø12 mm - Spar location: 50 mm behind leading edge - Central root connection - Root spar hole: Ø12 mm - Hinge hole: Ø6 mm - Aileron: 300 × 50 mm on each wing IMPORTANT: - Use accurate NACA 4412 airfoil geometry. - Maintain 200 mm chord throughout. - Keep left and right wings symmetric. - No upward or downward wing angle. - Do NOT include the gear mechanism. - Create only the wing geometry. - Fully parametric and editable. - Realistic structural thickness. - No unintended deformation. OUTPUT: 1. 3D solid wing 2. Top view 3. Front view 4. Side view 5. NACA 4412 airfoil section 6. Wing-root detail 7. Main spar detail 8. Aileron detail 9. Fully dimensioned 2D engineering drawing 10. Configuration label: DIHEDRAL = 0°
Parameters
| Name | Value | Range |
|---|---|---|
| Chord | 200 mm | 50 – 500 |
| NACA m | 0.04 | 0 – 0.1 |
| NACA p | 0.4 | 0.1 – 0.9 |
| NACA t | 0.12 | 0.05 – 0.2 |
| Span per wing | 800 mm | 100 – 2000 |
| Spar offset (behind LE) | 50 mm | 10 – 150 |
| Spar diameter | 12 mm | 4 – 30 |
| Hinge offset (behind LE) | 170 mm | 10 – 190 |
| Hinge diameter | 6 mm | 2 – 15 |
| Root block width | 80 mm | 20 – 200 |
| Root block chord | 60 mm | 20 – 200 |
| Root block thickness | 20 mm | 5 – 60 |
| Aileron span | 300 mm | 50 – 1000 |
| Aileron chord | 50 mm | 10 – 200 |
| Aileron thickness | 6 mm | 3 – 20 |
| Aileron inboard offset from root | 500 mm | 100 – 1500 |
| Aileron leading edge X | 160 mm | 100 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled