Gears and transmission
AeroMorph-GD Exploded Assembly
- Bounding box
- 21614.0 × 200.0 × 56.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create AeroMorph-GD complete parametric 3D assembly. Combine: 1. Gear Mechanism 2. Left Wing 3. Right Wing Units: mm Assembly: Motor → Pinion Gear → Main Gear → Output Shaft → Wing Hinge Key dimensions: - Motor: Ø28 × 30 - Pinion: Ø10 - Main Gear: Ø40 - Output Shaft: Ø6 × 50 - Bearing: Ø25 × 7 - Locking Plate: R30 × 5 - Locking Pin: Ø5 - Spar: Ø12 - Wing span: 1600 - Chord: 200 Locking positions: 0° / 10° / 20° Requirements: - Gear and shaft concentric - Main gear rigidly connected to output shaft - Wing rotates about hinge axis - Independent locking pin - No gear-based locking - Proper clearances - No interference - Parametric assembly - Fully editable parts Generate: - Complete 3D assembly - Exploded view - Front / Top / Side views - 0° / 10° / 20° configurations - Section view of gear mechanism - Section view of locking mechanism - Dimensioned engineering drawing - BOM Mark unverified dimensions: “PARAMETER TO BE VERIFIED”
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 2000 mm | 100 – 5000 |
| Motor Diameter | 28 mm | 10 – 100 |
| Motor Length | 30 mm | 10 – 100 |
| Pinion Module | 1 mm | 0.5 – 5 |
| Pinion Teeth | 10 teeth | 5 – 50 |
| Pinion Width | 5 mm | 1 – 20 |
| Pinion Bore | 5 mm | 1 – 20 |
| Main Gear Module | 1 mm | 0.5 – 5 |
| Main Gear Teeth | 40 teeth | 10 – 100 |
| Main Gear Width | 5 mm | 1 – 20 |
| Main Gear Bore | 6 mm | 1 – 20 |
| Shaft Diameter | 6 mm | 2 – 20 |
| Shaft Length | 50 mm | 10 – 200 |
| Keyway Width | 2 mm | 0.5 – 5 |
| Keyway Depth | 1 mm | 0.2 – 3 |
| Bearing OD | 25 mm | 5 – 100 |
| Bearing Width | 7 mm | 2 – 30 |
| Bearing Bore | 6 mm | 1 – 50 |
| Plate Radius | 30 mm | 5 – 100 |
| Plate Thickness | 5 mm | 1 – 20 |
| Center Bore | 8 mm | 1 – 30 |
| Pin Hole Diameter | 5 mm | 1 – 20 |
| Pin Hole Radius | 20 mm | 5 – 50 |
| Pin Diameter | 5 mm | 1 – 20 |
| Pin Length | 25 mm | 5 – 100 |
| Head Diameter | 8 mm | 2 – 30 |
| Head Thickness | 3 mm | 1 – 10 |
| Hinge OD | 20 mm | 5 – 100 |
| Hinge Length | 20 mm | 5 – 100 |
| Hinge Bore | 6 mm | 1 – 50 |
| Wing Span | 800 mm | 100 – 2000 |
| Wing Chord | 200 mm | 50 – 500 |
| Wing Thickness | 10 mm | 2 – 50 |
| Spar Diameter | 12 mm | 2 – 50 |
| Spar Length | 1600 mm | 100 – 3000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled