Everything else
Aerodynamic Ornithopter Crank Wheel
- Bounding box
- 50.0 × 50.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
create a diy ornithopter with a 3d kit built add some ways to make it better and more aerodynamic
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Diameter | 12 mm | 6 – 30 |
| Hub Height | 14 mm | 8 – 30 |
| Motor Shaft Bore | 4 mm | 2 – 10 |
| Disc Diameter | 50 mm | 20 – 100 |
| Disc Thickness | 4 mm | 2 – 12 |
| Crank Pin Radius | 16 mm | 8 – 40 |
| Crank Pin Diameter | 3 mm | 1 – 8 |
| Crank Pin Height | 6 mm | 2 – 20 |
| Lightening Hole Circle | 36 mm | 15 – 80 |
| Lightening Hole Diameter | 8 mm | 2 – 20 |
| Lightening Hole Count | 6 mm | 0 – 12 |
| Edge Fillet Radius | 0.6 mm | 0 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm