Gears and transmission
Adjustable Tie Rod Fork Wrench Tool
- Bounding box
- 340.0 × 125.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
A heavy-duty tool automotive mechanical separation tool combining a tie rod fork and an adjustable wrench mechanism. The tool features a 12-inch heavy - duty cylindrical handle that rotates to adjust the jaw width. The main body consists of a fixed spine integrated with a lower fork prong. The upper adjustable jaw travels vertically along a precision female square t-slot track machined into the spine with a 0.15mm clearance tolerance. To control jaw movement, a 90 degree internal gear driver is used: the top of the rotating handle features and integrated bevel worm gear that meshes directly into a vertical al bevel rack gear modeled on the spine-facing side of the sliding jaw. Turning the handle drives linear travel from a minimum jaw opening of 21/32 inches (16.67mm) to a maximum fully opened width of 3 inches (76.2mm). Directly beneath the handles bevel worm gear is a thick, wide integrated thrust bearing collar flange. This collar seats into a match internal recessed shoulder inside the main tool head casing to isolate the gear teeth from vertical forces. The main tool head features a split-case chassis design halved vertically to allow internal assembly of the captive handle gear and collar.
Parameters
| Name | Value | Range |
|---|---|---|
| Casing height | 120 mm | 80 – 200 |
| Casing width | 80 mm | 50 – 150 |
| Casing depth | 35 mm | 20 – 70 |
| Spine height | 180 mm | 100 – 300 |
| Spine width | 30 mm | 15 – 60 |
| Spine depth | 30 mm | 15 – 60 |
| Fork prong length | 90 mm | 40 – 150 |
| Fork thickness | 20 mm | 8 – 40 |
| Fork opening | 17 mm | 8 – 30 |
| T-slot width | 10 mm | 5 – 25 |
| T-slot depth | 5 mm | 2 – 15 |
| T-slot clearance | 0.15 mm | 0.05 – 0.5 |
| Jaw width | 70 mm | 30 – 120 |
| Jaw height | 40 mm | 20 – 80 |
| Jaw depth | 25 mm | 10 – 50 |
| Jaw opening | 40 mm | 16.67 – 76.2 |
| Handle length | 305 mm | 150 – 500 |
| Handle diameter | 20 mm | 10 – 40 |
| Handle axis height | 30 mm | 10 – 80 |
| Gear module | 2 mm | 1 – 5 |
| Gear teeth | 20 count | 10 – 40 |
| Gear width | 10 mm | 5 – 20 |
| Collar outside diameter | 45 mm | 25 – 80 |
| Collar thickness | 12 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled