Brackets and mounts
Adjustable Handlebar Extension with Centered T-Joints and Downward Clamps
- Bounding box
- 609.6 × 60.0 × 403.2 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
THe top T join is in the centre and equal length in each sides. total length must be 1 feet Bottom Tjoint the same. IT is in the centre and equal length in each sides. Total length will be 10 inches. Rotate the bottom two sided clamp to bottom which is in both sides of the bottom bar
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical Clamp Offset | 50 mm | 25 – 100 |
| Clamp Length | 50 mm | 20 – 80 |
| Clamp Width | 40 mm | 15 – 60 |
| Clamp Height | 60 mm | 30 – 100 |
| Handlebar Bore Dia. | 31.8 mm | 20 – 35 |
| Bottom Bar Length | 254 mm | 200 – 500 |
| Bottom Bar Dia. | 25.4 mm | 15 – 40 |
| Top Bar Dia. | 31.8 mm | 15 – 40 |
| Top Bar Length | 304.8 mm | 200 – 500 |
| T-Joint Outer Dia. | 50.8 mm | 30 – 80 |
| Bottom T-Joint Run Length | 254 mm | 100 – 400 |
| Top T-Joint Run Length | 304.8 mm | 100 – 400 |
| T-Joint Branch Length | 50.8 mm | 20 – 100 |
| Outer Tube OD | 25.4 mm | 10 – 40 |
| Tube Wall Thickness | 2 mm | 1 – 5 |
| Outer Tube Length | 200 mm | 50 – 500 |
| Inner Tube OD | 19 mm | 10 – 30 |
| Inner Tube Length | 200 mm | 50 – 500 |
| Min Overlap | 50 mm | 10 – 100 |
| Extension Amount | 0 mm | 0 – 200 |
| Lock Pin Dia. | 6 mm | 3 – 12 |
| Lock Pin Length | 30 mm | 10 – 80 |
| Lock Pin Offset from Top | 20 mm | 5 – 100 |
| Slot Clearance | 0.5 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent