Brackets and mounts
Actuation Ring with 6 Pivot Bosses
- Bounding box
- 140.0 × 140.0 × 23.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 3, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a mechanical actuation ring. Start with a hollow cylinder with an outer diameter of 140 mm, an inner diameter of 122 mm, and a height of 15 mm. On the top planar face of this ring, extrude 6 equally spaced cylindrical bosses to act as pivot mounts. Each boss should have a diameter of 10 mm and a height of 8 mm, positioned concentrically on a 130 mm bolt circle diameter. Finally, through the exact center of each of these 6 bosses, cut a 5 mm diameter through-hole that passes completely through both the boss and the main 15 mm ring.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 140 mm | 80 – 200 |
| Inner Diameter | 122 mm | 60 – 195 |
| Ring Height | 15 mm | 5 – 50 |
| Boss Count | 6 count | 3 – 12 |
| Boss Diameter | 10 mm | 4 – 20 |
| Boss Height | 8 mm | 2 – 30 |
| Bolt Circle Diameter | 130 mm | 70 – 195 |
| Through-Hole Diameter | 5 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent