Active Studio Monitor Enclosure

Here is the updated Text-to-CAD prompt injected with precise metric measurements suitable for a 5-inch studio monitor specification: **Text-to-CAD Prompt:** > A rectangular active studio monitor enclosure with exact outer dimensions of 285mm height, 175mm width, and 225mm depth, featuring a material shell thickness of 15mm. The front baffle features a 10mm radius fillet on all outer edges. The front face includes four specific cutouts: a 45mm diameter circular cutout centered horizontally at 220mm from the bottom edge for a tweeter; a 120mm diameter circular cutout centered horizontally at 110mm from the bottom edge for a 5-inch woofer; and two 25mm diameter circular cutouts positioned 35mm from the bottom edge and spaced exactly 90mm apart for front-firing bass reflex ports. On the left side panel, there is a 20mm diameter circular cutout for a rotary control knob, with its center point positioned exactly 50mm from the front baffle and vertically centered at 142.5mm from the bottom. The rear face features a large 250mm height by 145mm width rectangular cutout, recessed by 3mm, designed to house the amplifier and I/O backplate. The bottom face includes four 15mm diameter, 5mm tall cylindrical extrusions positioned exactly 20mm inward from each corner to serve as mounting points for rubber feet. > **Measurement Breakdown:** * **Total Volume (Outer):** 285mm (H) x 175mm (W) x 225mm (D) * **Shell Thickness:** 15mm * **Woofer Cutout:** 120mm diameter * **Tweeter Cutout:** 45mm diameter * **Bass Ports:** 25mm diameter (x2) * **Side Knob Hole:** 20mm diameter (placed 50mm from the front edge) * **Rear Amp Cavity:** 250mm (H) x 145mm (W), 3mm recess * **Edge Fillet (Front Baffle):** 10mm radius

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.