Gears and transmission
A320 Mini Turbofan with Internal Accessory Gearbox
- Bounding box
- 120.0 × 120.0 × 110.1 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 3, 2026
Download
Free to download and use. See the terms.
The prompt
add like a gearbox isnide it
Parameters
| Name | Value | Range |
|---|---|---|
| Fan Case OD | 120 mm | 40 – 300 |
| Nacelle Length | 90 mm | 30 – 250 |
| Nacelle Wall | 2.5 mm | 1 – 10 |
| Inlet Lip Radius | 1.5 mm | 0 – 8 |
| Fan Blade Count | 20 pcs | 3 – 40 |
| Fan Hub Dia | 30 mm | 8 – 120 |
| Fan Width | 10 mm | 3 – 40 |
| Blade Thickness | 2 mm | 0.8 – 6 |
| Tip Clearance | 1 mm | 0.2 – 5 |
| Spinner Cone Length | 10 mm | 2 – 40 |
| Core Cowl Dia | 40 mm | 10 – 150 |
| LP Shaft Dia | 12 mm | 3 – 60 |
| Shaft Length | 30 mm | 5 – 120 |
| Core Cowl Length | 40 mm | 10 – 150 |
| Exhaust Plug Length | 20 mm | 3 – 80 |
| Exhaust Tip Dia | 8 mm | 1 – 60 |
| Strut Count | 6 pcs | 2 – 16 |
| Strut Thickness | 4 mm | 1 – 15 |
| Strut Chord | 10 mm | 2 – 40 |
| Gear Module | 1 mm | 0.5 – 1.2 |
| Pinion Teeth | 12 teeth | 8 – 20 |
| Wheel Teeth | 24 teeth | 12 – 30 |
| Gear Face Width | 8 mm | 3 – 20 |
| Gear Bore Dia | 6 mm | 2 – 16 |
| Mesh Backlash | 0.4 mm | 0.1 – 1.5 |
| Housing Thickness | 8 mm | 3 – 25 |
| Housing Length | 46 mm | 20 – 80 |
| Housing Radial Height | 35 mm | 12 – 60 |
| Gearbox Axial Station | 66 mm | 10 – 200 |
| Housing Corner Fillet | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled