Brackets and mounts
7-DOF Robotic Arm Assembly
- Bounding box
- 1250.0 × 120.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
create an robotic arm with 7 freedom angle that can mount to a table define location for the step motor choose one and add take care of string The volume of the arm can position is a sphere of 400 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 120 mm | 80 – 200 |
| Base Plate Width | 120 mm | 80 – 200 |
| Base Plate Thickness | 10 mm | 5 – 20 |
| Mounting Hole Diameter | 5 mm | 3 – 10 |
| Hole Spacing | 80 mm | 40 – 150 |
| Base Rotation Diameter | 60 mm | 40 – 100 |
| Base Rotation Height | 55 mm | 30 – 80 |
| Shoulder Housing X | 50 mm | 30 – 80 |
| Shoulder Housing Y | 50 mm | 30 – 80 |
| Shoulder Housing Z | 40 mm | 20 – 60 |
| Upper Arm Diameter | 25 mm | 15 – 40 |
| Upper Arm Length | 200 mm | 100 – 350 |
| Elbow Housing X | 45 mm | 30 – 60 |
| Elbow Housing Y | 45 mm | 30 – 60 |
| Elbow Housing Z | 35 mm | 20 – 50 |
| Forearm Diameter | 20 mm | 10 – 30 |
| Forearm Length | 180 mm | 80 – 300 |
| Wrist Thickness | 60 mm | 30 – 80 |
| Wrist Width | 30 mm | 20 – 50 |
| Wrist Height | 30 mm | 20 – 50 |
| Gripper Base Length | 40 mm | 20 – 60 |
| Gripper Base Width | 20 mm | 10 – 40 |
| Gripper Base Height | 20 mm | 10 – 40 |
| Finger Length | 50 mm | 30 – 80 |
| Finger Width | 5 mm | 3 – 10 |
| Finger Thickness | 10 mm | 5 – 15 |
| Pad Length | 10 mm | 5 – 15 |
| Pad Width | 5 mm | 3 – 10 |
| Pad Height | 5 mm | 3 – 10 |
| Spring Diameter | 5 mm | 3 – 10 |
| Spring Length | 20 mm | 10 – 30 |
| Cable Chain Width | 15 mm | 10 – 25 |
| Cable Chain Height | 10 mm | 5 – 20 |
| Cable Chain Length | 400 mm | 200 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent