64.084.014.0
Loading the interactive model…
Interactive 3D model of 64x64x14mm 3-pass fin-channel cold plate chamber

Everything else

64x64x14mm 3-pass fin-channel cold plate chamber

1 views
Bounding box
84.0 × 64.0 × 14.0 mm
Engine
Precision B-rep
Parameters
27
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

One-piece ABS water chamber with top-inserted separate 40x40x11 mm finned aluminium heat sink; 3-pass flow between fins, dual plenums, seal groove, opposite horizontal barbs. Parametric dimensions.

Parameters

NameValueRange
Outer length64 mm60 – 70
Outer width64 mm60 – 70
Body height14 mm12 – 18
Floor thickness3 mm2 – 5
End wall thickness2.5 mm2 – 4
Sink pocket size40.2 mm39.5 – 41
Pocket depth11 mm9 – 12
Sink side clearance0.2 mm0.05 – 0.5
Fin height8.5 mm6 – 10
Fin count12 mm8 – 16
Fin thickness1.2 mm0.8 – 1.8
Fin gap2.1 mm1.5 – 2.8
Divider thickness1 mm0.7 – 1.5
Divider A Y25.2 mm23 – 27
Divider B Y38.6 mm36 – 41
RTV groove width1.5 mm1 – 2
RTV groove depth1 mm0.5 – 1.5
Port bore6 mm4 – 8
Barb OD8 mm6 – 10
Barb length10 mm6 – 15
Ridge OD9.2 mm8.5 – 10
Ridge position from tip6 mm4 – 8
Ridge taper length1 mm0.5 – 2
Port center Z8.5 mm6 – 10
Inlet center Y18.6 mm15 – 22
Outlet center Y45.2 mm42 – 49
Outer vertical edge fillet0.5 mm0.2 – 0.8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

64x64x14mm 3-pass fin-channel cold plate chamber - Free CAD Model (STEP, STL) | TextoCAD