Gears and transmission
6-Stop Gearless Passenger Elevator Assembly
- Bounding box
- 1892.5 × 1540.0 × 19350.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
I want to design a architect plan for the below Lift Specification. Type Specification Lift Type Automatic 6 Person capacity, Passenger Lift No of Lift 1 Capacity 6 Passengers / 408kgs Main Drive Integrated Variable Voltage Variable Frequency (Monarch Japan) Operation Microprocessor Based Simplex Collective Controller. Separate Landing Push Button Box for All Landing with Digital Dot Matrix Indicator. Speed & Travel 0.90 Mps No of Landings Ground + 5 Floors (Total 6 Stops) No & Position of Car Entrance One in front only Clear Opening of Doors 700mm X 2000mm Type of Landing Door SS Matt Finish 304 Grade Matt door Type of Car Door Center Opening Automatic Doors Car Size 1100mm Width X 1100mm Depth Car Interior Design Panels SS Matt Finish 304 grade with left and right panel etching. back panel half mirror and half etching, bottom skirting. SS false ceiling, LED fittings & blower. Operating Panels & Signals Wall Mounted landing operating panels Car Operator & Landing Door Mechanism Genesis Elevator System (Korea) Type & Position of Motor Gearless Motor positioned above lift channel Car Guide Rails 65mm X 70mm X 9mm (Marazzi – Italy) Counterweight Rails 50mm X 50mm X 5mm (Marazzi – Italy) Main Steel Ropes for car 8mm (Usha Martin) O.S.G Rope 8mm (Usha Martin) Gearless Motor B 125.R1 – Mona 3KW 120rpm Door Screen Sensors LiftByte / Weco (As available) Control Panel Micro Processor type, close loop logic, based V.V.V.F controller – Monarch system Floor Mate Destone Sheet Electrical Wires Flat Lift travelling cable (Imported)
Parameters
| Name | Value | Range |
|---|---|---|
| Car Interior Width | 1100 mm | 700 – 1600 |
| Car Interior Depth | 1100 mm | 700 – 1600 |
| Car Interior Height | 2200 mm | 1800 – 2600 |
| SS Panel Thickness | 20 mm | 5 – 40 |
| False Ceiling Thickness | 20 mm | 5 – 60 |
| Door Clear Opening Width | 700 mm | 500 – 1200 |
| Door Clear Opening Height | 2000 mm | 1500 – 2400 |
| Door Panel Thickness | 30 mm | 10 – 60 |
| Number of Stops | 6 pcs | 2 – 12 |
| Floor to Floor Height | 3000 mm | 2400 – 4500 |
| Overhead Clearance | 800 mm | 300 – 2000 |
| Car Rail Flange Width | 65 mm | 40 – 120 |
| Car Rail Depth | 70 mm | 40 – 130 |
| Car Rail Web Thickness | 9 mm | 3 – 20 |
| CWT Rail Flange Width | 50 mm | 30 – 100 |
| CWT Rail Depth | 50 mm | 30 – 100 |
| CWT Rail Web Thickness | 5 mm | 3 – 15 |
| Counterweight Width | 300 mm | 120 – 600 |
| Counterweight Depth | 150 mm | 60 – 400 |
| Counterweight Height | 800 mm | 200 – 2000 |
| Traction Sheave Diameter | 500 mm | 320 – 800 |
| Traction Sheave Width | 80 mm | 30 – 200 |
| Gearless Motor Body Dia | 260 mm | 150 – 500 |
| Gearless Motor Body Length | 400 mm | 150 – 800 |
| Main Rope Diameter | 8 mm | 4 – 16 |
| Main Rope Falls | 4 pcs | 2 – 10 |
| Governor O.S.G Rope Dia | 8 mm | 4 – 16 |
| Car Operating Panel Width | 90 mm | 50 – 200 |
| Car Operating Panel Height | 450 mm | 200 – 900 |
| Car Operating Panel Thickness | 15 mm | 5 – 40 |
| Landing Panel Width | 100 mm | 50 – 250 |
| Landing Panel Height | 300 mm | 100 – 600 |
| Landing Panel Depth | 40 mm | 10 – 80 |
| Control Cabinet Width | 600 mm | 300 – 1200 |
| Control Cabinet Depth | 400 mm | 200 – 800 |
| Control Cabinet Height | 1200 mm | 600 – 2200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled