Gears and transmission
6-Speed Gearbox
- Bounding box
- 200.0 × 101.9 × 92.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
design 6 speed gearbox
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 120 mm | 60 – 200 |
| Housing Width | 80 mm | 50 – 150 |
| Lower Housing Height | 45 mm | 20 – 80 |
| Upper Housing Height | 35 mm | 20 – 80 |
| Wall Thickness | 5 mm | 2 – 10 |
| Bearing Width | 10 mm | 5 – 20 |
| Shaft Axis Height | 22 mm | 5 – 50 |
| Shaft Length | 140 mm | 100 – 250 |
| Input Shaft Diameter | 10 mm | 5 – 30 |
| Output Shaft Diameter | 12 mm | 5 – 30 |
| Bearing Outer Diameter | 24 mm | 10 – 50 |
| Center Distance | 44 mm | 30 – 100 |
| Gear Module | 2 mm | 0.5 – 4 |
| Gear Width | 10 mm | 4 – 20 |
| Gear Spacing | 14 mm | 10 – 30 |
| Stage 1 Pinion Teeth | 14 teeth | 8 – 80 |
| Stage 1 Gear Teeth | 30 teeth | 8 – 80 |
| Stage 2 Pinion Teeth | 16 teeth | 8 – 80 |
| Stage 2 Gear Teeth | 28 teeth | 8 – 80 |
| Stage 3 Pinion Teeth | 18 teeth | 8 – 80 |
| Stage 3 Gear Teeth | 26 teeth | 8 – 80 |
| Stage 4 Pinion Teeth | 20 teeth | 8 – 80 |
| Stage 4 Gear Teeth | 24 teeth | 8 – 80 |
| Stage 5 Pinion Teeth | 22 teeth | 8 – 80 |
| Stage 5 Gear Teeth | 22 teeth | 8 – 80 |
| Stage 6 Pinion Teeth | 24 teeth | 8 – 80 |
| Stage 6 Gear Teeth | 20 teeth | 8 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled