Brackets and mounts
6-DOF Robot Arm with Camera Gripper
- Bounding box
- 107.9 × 70 × 227.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
I want a robotic arm 6 dof with a camera holder on the gripper
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 70 mm | 40 – 120 |
| Base height | 14 mm | 8 – 30 |
| Mounting hole circle | 56 mm | 30 – 110 |
| Mounting screw hole | 3.4 mm | 2.5 – 6 |
| Turret diameter | 46 mm | 30 – 80 |
| Arm link width | 24 mm | 16 – 40 |
| Upper arm length | 80 mm | 50 – 150 |
| Forearm length | 70 mm | 40 – 150 |
| Joint hub radius | 13 mm | 8 – 20 |
| Gripper width | 40 mm | 24 – 70 |
| Finger length | 20 mm | 10 – 40 |
| Camera housing width | 28 mm | 16 – 50 |
| Camera lens diameter | 12 mm | 6 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
