Gears and transmission
52T Roller Chain Sprocket
- Bounding box
- 109.2 × 109.2 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
I need a 52t sprocket with a chain to match
Parameters
| Name | Value | Range |
|---|---|---|
| Tooth Count | 52 teeth | 10 – 120 |
| Chain Pitch | 6.35 mm | 3 – 25.4 |
| Roller Diameter | 3.18 mm | 1.5 – 15 |
| Sprocket Thickness | 3.2 mm | 1 – 12 |
| Bore Diameter | 12 mm | 4 – 40 |
| Hub Diameter | 30 mm | 10 – 60 |
| Hub Length | 10 mm | 3 – 30 |
| Lightening Hole Count | 5 count | 0 – 12 |
| Lightening Hole Diameter | 10 mm | 0 – 30 |
| Lightening Hole BC Radius | 32 mm | 10 – 60 |
| Chain Roller Length | 3.4 mm | 1 – 15 |
| Chain Side Plate Thickness | 0.8 mm | 0.3 – 4 |
| Chain Side Plate Width | 4 mm | 1.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled