50 t Hoist Rope Drum - 2x2 Reeving, 10 m Lift, FEM M5

1 views

Bounding box: 780 × 884 × 780 mm
Engine: 3D Printing B-rep
Parameters: 19
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

Rope drum 2x2 reeving, 10m lift, 50ton capacity, M5

Parameters

Name	Value	Range
Wire rope diameter	30 mm	8 – 60
Grooved (rope centre) diameter	600 mm	100 – 1200
Groove pitch on the barrel	32 mm	10 – 80
Total grooved barrel length	500 mm	80 – 1500
Central rope divider thickness	20 mm	4 – 80
Central rope divider diameter	700 mm	110 – 1600
End flange diameter	780 mm	120 – 1600
End flange thickness	30 mm	6 – 100
Drum bore for the shaft	238 mm	20 – 600
Shaft body diameter	240 mm	20 – 600
Bearing journal diameter	200 mm	12 – 500
Shaft half length	440 mm	60 – 1200
Bearing bore diameter	200 mm	12 – 500
Bearing housing outside diameter	300 mm	40 – 700
Bearing block width along the shaft	140 mm	20 – 300
Bearing base plate length	320 mm	40 – 800
Bearing base plate thickness	20 mm	4 – 80
Bearing centre offset from drum centre	360 mm	40 – 1200
Foundation bolt hole diameter	22 mm	3 – 50

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS