5-Dart Nerf Magazine

1 views

Bounding box: 44 × 24 × 107.5 mm
Engine: 3D Printing B-rep
Parameters: 25
Published: November 6, 2026

Download

Free to download and use. See the terms.

The prompt

make iit look similar to the pgoto especially the connection part

Parameters

Name	Value	Range
Body height	90 mm	50 – 200
Body width	40 mm	24 – 80
Body depth	20 mm	14 – 60
Wall thickness	3 mm	1.2 – 6
Vertical corner radius	4 mm	1 – 10
Rib band height	4 mm	2 – 10
Neck tower height	13 mm	5 – 40
Neck inset per side	1 mm	0 – 4
Mouth chamfer	1.5 mm	0.5 – 4
Feed lip height	4 mm	1 – 12
Feed lip protrusion	3 mm	1 – 8
Feed lip length	10 mm	3 – 20
Catch pad thickness	2.5 mm	1 – 6
Catch notch width	13 mm	4 – 34
Catch notch height	7 mm	2 – 20
Catch notch depth	2 mm	0.5 – 5
Installed spring height	36 mm	12 – 70
Spring span across magazine	26 mm	10 – 34
Spring strip thickness	1.5 mm	1 – 3
Plate thickness	5 mm	3 – 10
Plate lip around body	2 mm	1 – 6
Slide tab height	6 mm	3 – 12
Pusher thickness	4 mm	2 – 10
Dart cradle radius	6 mm	3 – 12
Sliding clearance	0.3 mm	0.1 – 0.6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS