Brackets and mounts
4WD Robotic Smart Car Assembly
- Bounding box
- 175.0 × 187.5 × 101.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
A realistic 3D model of an AI-powered robotic smart car built on a 4-wheel drive chassis kit. On top of the chassis, mount a central Raspberry Pi Zero 2W board (as the main brain), a Raspberry Pi camera module attached via ribbon cable facing forward (for vision tracking), a small USB mini microphone, a 3W mono speaker with a PAM8403 amplifier module, an L298N motor driver board wired to four DC motors on the wheels, and a compact 5V power bank placed neatly in the middle to power the entire electronics system. The design should clearly showcase an integrated, clean assembly of a smart robotics project suitable for a science exhibition."
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 170 mm | 100 – 300 |
| Chassis Width | 130 mm | 80 – 220 |
| Chassis Thickness | 3 mm | 2 – 10 |
| Mounting Hole Diameter | 3.2 mm | 1 – 8 |
| DC Motor Length | 70 mm | 30 – 120 |
| DC Motor Width | 22 mm | 10 – 40 |
| DC Motor Height | 18 mm | 10 – 40 |
| Wheel Diameter | 65 mm | 30 – 120 |
| Wheel Width | 27 mm | 10 – 60 |
| Wheelbase (Front-Rear X) | 100 mm | 60 – 200 |
| Track Width (Left-Right Y) | 160 mm | 90 – 220 |
| Wheel Top Inset from Chassis | 2 mm | 0 – 10 |
| Power Bank Length | 90 mm | 50 – 150 |
| Power Bank Width | 60 mm | 30 – 100 |
| Power Bank Height | 20 mm | 10 – 50 |
| Raspberry Pi Zero 2W Length | 65 mm | 30 – 100 |
| Raspberry Pi Zero 2W Width | 30 mm | 20 – 60 |
| Raspberry Pi PCB Thickness | 5 mm | 1 – 10 |
| Pi Standoff Height | 10 mm | 2 – 30 |
| Standoff Diameter | 4 mm | 2 – 8 |
| L298N Length | 43 mm | 30 – 80 |
| L298N Width | 43 mm | 30 – 80 |
| L298N Height | 27 mm | 10 – 60 |
| Camera PCB Length (Y) | 25 mm | 10 – 40 |
| Camera PCB Height (Z) | 24 mm | 10 – 40 |
| Camera PCB Thickness (X) | 5 mm | 1 – 10 |
| Camera Lens Diameter | 8 mm | 3 – 15 |
| Camera Lens Length | 5 mm | 2 – 15 |
| Microphone Length | 20 mm | 10 – 40 |
| Microphone Width | 15 mm | 5 – 30 |
| Microphone Height | 8 mm | 2 – 20 |
| Speaker Diameter | 50 mm | 30 – 80 |
| Speaker Thickness | 20 mm | 5 – 40 |
| PAM8403 Length | 30 mm | 15 – 50 |
| PAM8403 Width | 20 mm | 10 – 40 |
| PAM8403 Thickness | 5 mm | 1 – 10 |
| Ribbon Cable Width | 10 mm | 3 – 20 |
| Ribbon Cable Thickness | 0.5 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu