450 ml Luxury Reed Diffuser Bottle

Create a precision CAD model of a premium 450 ml reed diffuser bottle based on the reference image. Overall product: - Target liquid capacity: exactly 450 ml. - Overall shape: short, wide cylindrical luxury bottle. - Approximate external dimensions: 120 mm wide × 75 mm deep × 70 mm high, excluding the raised reed collar. - Keep the proportions elegant and similar to a luxury cosmetic/fragrance bottle. - The bottle must be symmetrical around the vertical center axis. Main body: - Cylindrical body with a flat top and bottom. - Use smoothly rounded external edges and generous fillets. - The side walls should be slightly curved/softened rather than completely sharp. - The bottom should have a subtle rounded transition. - The top shoulder should transition smoothly into the flat top surface. - Internal liquid reservoir must provide exactly 450 ml usable volume. - Use a realistic wall thickness suitable for a manufactured product, approximately 3 mm. - The inside must be hollow and completely enclosed except for the central reed opening system. Reed collar: - Create a short raised cylindrical collar centered on the top. - Approximate collar diameter: 32 mm. - Approximate collar height: 8 mm. - Create 5 evenly distributed circular reed openings inside the collar. - Reed openings should be vertical and connected to the internal liquid reservoir. - The center opening should be aligned with the main vertical axis. - The other four openings should be evenly spaced around the center opening. Manufacturing: - Make the geometry realistic and manufacturable. - Use parametric dimensions wherever possible. - Avoid impossible geometry, extremely thin walls or sharp internal corners. - Do not add decorative texture, color, labels, logo or graphics yet. - Focus on the physical CAD geometry and internal 450 ml reservoir. The final model should be suitable as a starting point for manufacturing and later export as STEP.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.