4-Hole Corner Block

1 views

Bounding box: 61 × 60 × 85 mm
Engine: 3D Printing B-rep
Parameters: 10
Published: October 31, 2026

Download

Free to download and use. See the terms.

The prompt

// Outer block dimensions (mm for 3D print) block_x = 61; // 6.1 cm (front‑back) block_y = 60; // 6.0 cm (left‑right) block_z = 85; // 8.5 cm (height) hole_dia = 23; // 2.3 cm diameter per hole hole_depth = 20;// 2 cm depth (blind holes, not through) gap = 6; // 0.6 cm minimum gap (edge‑to‑edge) hole_r = hole_dia / 2; // Calculate centre positions matching sketch layout cx1 = gap + hole_r; cx2 = cx1 + hole_dia + gap; cy1 = gap + hole_r; cy2 = cy1 + hole_dia + gap; difference() { // Sharp square‑corner block — no rounded edges cube([block_x, block_y, block_z]); translate([cx1, cy1, 0]) cylinder(d=hole_dia, h=hole_depth); translate([cx2, cy1, 0]) cylinder(d=hole_dia, h=hole_depth); translate([cx1, cy2, 0]) cylinder(d=hole_dia, h=hole_depth); translate([cx2, cy2, 0]) cylinder(d=hole_dia, h=hole_depth); }

Parameters

Name	Value	Range
Width X	61 mm	20 – 200
Depth Y	60 mm	20 – 200
Height Z	85 mm	10 – 250
Hole diameter	23 mm	5 – 50
Full-diameter hole depth	20 mm	2 – 200
Hole edge to block edge / web between holes	6 mm	1 – 30
Lead-in chamfer at hole mouth	1 mm	0 – 5
Conical drill point depth	6 mm	0 – 20
Vertical corner radius (0 = sharp)	0 mm	0 – 15
Bottom edge chamfer (0 = sharp)	0 mm	0 – 4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS