Loading the interactive model…
Interactive 3D model of 4前進檔+倒檔變速箱模型Everything else
4前進檔+倒檔變速箱模型
1 views
- Bounding box
- 150.0 × 122.9 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
我想建立一個汽車齒輪變速箱模型,要有一到四個檔位及一個倒退檔,整個尺寸希望控制在15*15*20公分以內
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 150 mm | 120 – 190 |
| Housing Width | 120 mm | 80 – 140 |
| Housing Height | 120 mm | 80 – 140 |
| Base Thickness | 8 mm | 4 – 15 |
| End Plate Thickness | 10 mm | 6 – 20 |
| Shaft Center Height | 60 mm | 30 – 90 |
| Input Shaft Diameter | 8 mm | 5 – 15 |
| Output Shaft Diameter | 12 mm | 6 – 20 |
| Reverse Shaft Diameter | 8 mm | 5 – 15 |
| Shaft Length | 150 mm | 100 – 190 |
| Gear Module | 2 mm | 1 – 3 |
| Gear Width | 8 mm | 4 – 16 |
| Shaft Center Distance | 50 mm | 40 – 70 |
| 1st Input Teeth | 14 teeth | 10 – 20 |
| 1st Output Teeth | 36 teeth | 25 – 45 |
| 2nd Input Teeth | 18 teeth | 12 – 24 |
| 2nd Output Teeth | 32 teeth | 20 – 40 |
| 3rd Input Teeth | 22 teeth | 14 – 28 |
| 3rd Output Teeth | 28 teeth | 18 – 36 |
| 4th Input Teeth | 25 teeth | 16 – 32 |
| 4th Output Teeth | 25 teeth | 16 – 32 |
| Reverse Input Teeth | 14 teeth | 10 – 20 |
| Reverse Idler Teeth | 16 teeth | 10 – 24 |
| Reverse Output Teeth | 36 teeth | 25 – 45 |
| 1st Gear Axial Position | 30 mm | 20 – 130 |
| 2nd Gear Axial Position | 45 mm | 20 – 130 |
| 3rd Gear Axial Position | 60 mm | 20 – 130 |
| 4th Gear Axial Position | 75 mm | 20 – 130 |
| Reverse Gear Axial Position | 95 mm | 20 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
35 × 46.4 × 51.1 mm3D Printing
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
STLGLB15 PARAMS
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
STLGLB7 PARAMS
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
STLGLB22 PARAMS
