360-Degree Pendulum Mechanism

1 views

Bounding box: 2100.0 × 1000.0 × 4775.0 mm
Engine: Precision B-rep
Parameters: 24
Published: September 28, 2026

Download

Free to download and use. See the terms.

The prompt

Please draw a 4-meter-long pendulum mechanism capable of rotating 360 degrees.

Parameters

Name	Value	Range
Base Plate Length	2000 mm	1500 – 3000
Base Plate Width	1000 mm	500 – 2000
Base Plate Thickness	100 mm	50 – 200
Mounting Hole Diameter	25 mm	10 – 50
Mounting Hole Offset	150 mm	50 – 400
Upright Column Size	200 mm	100 – 400
Upright Height	4500 mm	3000 – 6000
Cross Brace Length	1600 mm	1000 – 2500
Cross Brace Width	150 mm	50 – 300
Cross Brace Height	150 mm	50 – 300
Cross Brace Center Height	2200 mm	1500 – 3000
Main Axle Diameter	80 mm	40 – 150
Main Axle Length	2100 mm	1000 – 3000
Main Axle Center Height	4650 mm	4000 – 5500
Bearing Housing Length	180 mm	100 – 300
Bearing Housing Width	120 mm	80 – 200
Bearing Housing Height	100 mm	50 – 200
Keyway Width	20 mm	10 – 40
Keyway Depth	10 mm	5 – 20
Pendulum Hub Diameter	250 mm	150 – 400
Pendulum Hub Thickness	120 mm	80 – 200
Pendulum Rod Diameter	60 mm	30 – 100
Pendulum Rod Length	4000 mm	3000 – 5000
Bob Mass Diameter	400 mm	200 – 600

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS