Gears and transmission
32 Tooth Spur Gear
- Bounding box
- 70.0 × 70.0 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a gear with 32 teeth with its width of around 6-8CM
Parameters
| Name | Value | Range |
|---|---|---|
| Face width | 70 mm | 55 – 90 |
| Outer diameter | 70 mm | 55 – 90 |
| Number of teeth | 32 mm | 24 – 64 |
| Shaft hole diameter | 10 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled
Assembled 2WD Sumo Robot
Design a compact, aggressive 2-wheel-drive competition SUMO ROBOT. Main chassis: 260×200×6 mm plywood. 2 STD D-shaft gear motors. 2 wheels: Ø50×20 mm. Controller board: 100×60 mm.