Everything else
32 mm Boring Bar + Indexable Tool Holder
- Bounding box
- 32 × 32 × 94.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
lisää tuollainen pidin tuohon neliöreikään
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter, 32 h6 | 32 mm | 10 – 60 |
| Overall length | 80 mm | 30 – 200 |
| Square tool-bit hole, 16x16 + clearance | 16.2 mm | 4 – 30 |
| Set-screw hole dia (M6 tap drill = 5.0) | 5 mm | 2 – 12 |
| First locking screw, from base | 20 mm | 5 – 75 |
| Second locking screw, from base | 60 mm | 5 – 75 |
| 45 deg chamfer size | 1 mm | 0 – 3 |
| Sliding clearance per side in the hole | 0.2 mm | 0.05 – 0.5 |
| Length of the tool shank inside the bar | 70 mm | 20 – 75 |
| Head across flats / shoulder | 20 mm | 14 – 30 |
| Head height above the bar end face | 14 mm | 8 – 30 |
| 45 deg lead chamfer on the head corner | 3 mm | 0 – 6 |
| Lead angle of the cutting edge | 45 deg | 0 – 60 |
| Triangular insert edge length | 11 mm | 5 – 16 |
| Insert thickness | 3.5 mm | 2 – 6 |
| Insert seat clearance | 0.2 mm | 0.05 – 0.5 |
| Insert clamp screw hole, M3 | 3.4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm