Gears and transmission
3-Shaft Cast Iron Gear Train (50 mm Gear, 6 Gears)
- Bounding box
- 141.9 × 54.0 × 56.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
GEAR WITH DIAMETER 50 MM AND MEDULE 20 FROM CAST IRON IN CAR GEAR BOX GIVE 10 SPEED CONTAINT FROM 3 SHAFTS EATH SHAFT CARRY TO GEARS
Parameters
| Name | Value | Range |
|---|---|---|
| Module (m) | 2 mm | 0.5 – 6 |
| Face Width | 18 mm | 6 – 40 |
| Gap Between Gear Stations | 4 mm | 1 – 20 |
| Mesh Allowance (centre distance reduction) | 1 mm | 0.5 – 3 |
| Shaft Diameter | 15.2 mm | 6 – 40 |
| Gear Bore Diameter | 15 mm | 5 – 39 |
| Shaft End Overhang | 8 mm | 0 – 30 |
| Shaft A - Gear 1 Teeth (50 mm pitch dia at m=2) | 25 teeth | 12 – 60 |
| Shaft A - Gear 2 Teeth | 20 teeth | 12 – 60 |
| Shaft B - Gear 1 Teeth | 20 teeth | 12 – 60 |
| Shaft B - Gear 2 Teeth | 25 teeth | 12 – 60 |
| Shaft C - Gear 1 Teeth | 20 teeth | 12 – 60 |
| Shaft C - Gear 2 Teeth | 25 teeth | 12 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled