Gears and transmission
3-Input / 4-Output Bicycle Gearbox
- Bounding box
- 140.0 × 90.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Design the gearbox created by pinion that uses 3 input gear mesh and 4output gear mesh for bicycle
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length (X) | 140 mm | 80 – 240 |
| Housing Width (Y) | 90 mm | 50 – 180 |
| Housing Height (Z) | 45 mm | 25 – 100 |
| Wall Thickness | 4 mm | 2 – 10 |
| Input Bearing Bore | 10 mm | 4 – 30 |
| Output Bearing Bore | 12 mm | 4 – 30 |
| Gear Module | 1.75 mm | 1 – 3 |
| Gear Face Width | 8 mm | 4 – 20 |
| Pinion Teeth (12T) | 12 teeth | 8 – 24 |
| Input Gear 1 Teeth | 18 teeth | 10 – 40 |
| Input Gear 2 Teeth | 22 teeth | 10 – 40 |
| Input Gear 3 Teeth | 26 teeth | 10 – 40 |
| Output Gear 1 Teeth | 28 teeth | 10 – 50 |
| Output Gear 2 Teeth | 24 teeth | 10 – 50 |
| Output Gear 3 Teeth | 20 teeth | 10 – 50 |
| Output Gear 4 Teeth | 16 teeth | 10 – 50 |
| Input Shaft Diameter | 10 mm | 4 – 30 |
| Input Shaft Length | 90 mm | 40 – 200 |
| Output Shaft Diameter | 12 mm | 4 – 30 |
| Output Shaft Length | 100 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled