Brackets and mounts
3‑in‑1 Charging Dock
- Bounding box
- 190.0 × 95.0 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Rebuild the existing model's TOP geometry. Keep the 190mm x 95mm x 25mm rounded base, but remove the incorrect floating rings. The finished dock must have three functional charging stations on the TOP surface, arranged left-to-right: LEFT: A recessed circular holder for one official Apple Watch charging puck. The puck must sit inside the dock, flush with the top surface, and be removable. CENTER: A vertical iPhone 13 cradle leaning backward 12 degrees. The cradle must support the bottom of the phone and fit a phone plus case up to 13mm thick. Add a centered opening at the bottom of the cradle for the original Apple Lightning connector. The Lightning connector must be held by a separate removable snap-in insert. RIGHT: A recessed circular holder for a second official Apple Watch charging puck. This is for charging AirPods Pro 2. The puck must sit flush with the top surface and be removable. The three stations must be clearly visible from the TOP view. Leave generous spacing between them. Keep the rounded Apple-inspired exterior, hidden cable routing underneath, removable bottom cover, and four rubber-foot recesses. The top should look like a finished charging dock, NOT a flat box with rings attached to it. All charging holders and the Lightning holder must be integrated into the top surface. Prioritize functional geometry and 3D printing over decorative details.
Parameters
| Name | Value | Range |
|---|---|---|
| Dock width | 190 mm | 150 – 250 |
| Dock depth | 95 mm | 70 – 130 |
| Dock height | 25 mm | 15 – 40 |
| Corner radius | 8 mm | 2 – 20 |
| Cradle angle | 12 deg | 5 – 25 |
| Slot width | 80 mm | 70 – 100 |
| Slot depth (case thickness) | 13 mm | 8 – 20 |
| Slot height (into dock) | 20 mm | 10 – 35 |
| Lightning pocket length | 15 mm | 10 – 25 |
| Lightning pocket width | 10 mm | 6 – 15 |
| Lightning pocket height | 8 mm | 4 – 15 |
| Left puck x position | -65 mm | -85 – -40 |
| Right puck x position | 65 mm | 40 – 85 |
| Puck recess diameter | 31 mm | 25 – 40 |
| Puck recess depth | 5.5 mm | 3 – 10 |
| Bottom cover thickness | 3 mm | 1.5 – 6 |
| Snap tab width | 10 mm | 5 – 15 |
| Snap tab length | 6 mm | 3 – 12 |
| Snap tab height | 5 mm | 2 – 8 |
| Rubber foot recess diameter | 12 mm | 8 – 20 |
| Rubber foot recess depth | 2 mm | 1 – 4 |
| Cable channel width | 5 mm | 3 – 8 |
| Cable channel depth | 4 mm | 2 – 8 |
| Central cavity width | 40 mm | 20 – 60 |
| Central cavity length | 60 mm | 30 – 90 |
| Central cavity depth | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent