Brackets and mounts
3-in-1 Charging Dock
- Bounding box
- 190.0 × 115.0 × 34.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional 3D-printable 3-in-1 charging dock for PLA. Overall size: 190mm wide x 95mm deep x 25mm tall. Use a minimalist Apple-inspired design with large rounded corners and smooth edges. Arrange the devices left-to-right: 1. Apple Watch charging puck on the left. 2. iPhone 13 vertically in the center. 3. AirPods Pro 2 on the right, charged using a second Apple Watch charging puck. The iPhone leans backward about 12 degrees and must fit with a case up to 13mm thick. The original Apple Lightning cable enters the phone from below and is held by a removable snap-in Lightning connector insert. Make both Apple Watch charging puck holders removable/replaceable press-fit inserts. Hide all three cables inside the dock. Add internal cable channels and a cable-storage cavity. Make the dock two pieces: a main upper body and removable bottom cover secured with printed snap tabs. Add four 12mm diameter x 2mm deep rubber-foot recesses underneath. Design for FDM PLA with a 0.4mm nozzle and 0.2mm layers. Avoid supports where possible. Make important dimensions parametric.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 190 mm | 150 – 250 |
| Overall Depth | 95 mm | 70 – 120 |
| Overall Height | 25 mm | 20 – 40 |
| Corner Radius | 15 mm | 5 – 25 |
| Cradle Tilt Angle | 12 deg | 5 – 20 |
| Cradle Slot Width | 80 mm | 70 – 100 |
| Cradle Slot Depth | 22 mm | 15 – 30 |
| Cradle Slot Height | 15 mm | 10 – 25 |
| Puck Recess Diameter | 40 mm | 38 – 44 |
| Puck Recess Depth | 12 mm | 10 – 15 |
| Left Puck X Position | -60 mm | -80 – -40 |
| Right Puck X Position | 60 mm | 40 – 80 |
| Puck Insert OD | 40 mm | 38 – 44 |
| Puck Insert ID | 34 mm | 30 – 38 |
| Insert Height | 12 mm | 10 – 15 |
| Cable Notch Width | 8 mm | 5 – 12 |
| Retaining Lip Width | 2 mm | 1 – 3 |
| Lip Thickness | 1 mm | 0.5 – 2 |
| Lightning Insert Length | 25 mm | 20 – 30 |
| Lightning Insert Width | 15 mm | 12 – 20 |
| Lightning Insert Height | 8 mm | 5 – 10 |
| Connector Slot Width | 9 mm | 7 – 12 |
| Slot Thickness | 3 mm | 1 – 5 |
| Bottom Cover Thickness | 3 mm | 2 – 5 |
| Snap Tab Width | 8 mm | 5 – 12 |
| Snap Tab Length | 6 mm | 4 – 10 |
| Snap Tab Height | 3 mm | 2 – 5 |
| Rubber Foot Diameter | 12 mm | 8 – 16 |
| Foot Recess Depth | 2 mm | 1 – 3 |
| Cable Channel Width | 5 mm | 3 – 8 |
| Channel Depth | 3 mm | 2 – 5 |
| Central Cavity Width | 60 mm | 40 – 80 |
| Central Cavity Length | 40 mm | 30 – 60 |
| Central Cavity Depth | 5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent