Everything else
2D Car Model (with / without side mirror)
- Bounding box
- 100.0 × 24.0 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
need 2 simple car models. 2d. one with outer rear view side mirror and one without the outer rear view side mirror
Parameters
| Name | Value | Range |
|---|---|---|
| Car Length | 100 mm | 60 – 200 |
| Body Height (roof) | 30 mm | 18 – 60 |
| Plate Thickness (2D depth) | 10 mm | 4 – 30 |
| Wheel Radius | 10 mm | 5 – 22 |
| Axle Inset (fraction of length) | 0.22 ratio | 0.12 – 0.35 |
| Outer Rear-View Mirror (1 = with, 0 = without) | 1 flag | 0 – 1 |
| Mirror Position Along Length | 0.6 ratio | 0.15 – 0.85 |
| Mirror Arm Length (out from side) | 5 mm | 2 – 15 |
| Mirror Arm Thickness | 2.5 mm | 1 – 6 |
| Mirror Head Thickness (fore-aft) | 3 mm | 1 – 8 |
| Mirror Head Width (out from side) | 10 mm | 4 – 25 |
| Mirror Head Height | 7 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm