Loading the interactive model…
Interactive 3D model of Выносной крючок для ромбовидной перекладины 26 ммEverything else
Выносной крючок для ромбовидной перекладины 26 мм
1 views
- Bounding box
- 79.0 × 66.5 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Крючок для квадратной перекладины 2.6 см, повернутой ромбом. Основание под углом, обхватывает верх и нижнюю переднюю грань, крюк вынесен вперёд от перекладины и висит ровно.
Parameters
| Name | Value | Range |
|---|---|---|
| Bar square side | 26 mm | 15 – 40 |
| Fit clearance | 0.4 mm | 0 – 1.5 |
| Wall thickness | 5 mm | 3 – 8 |
| Hook width | 15 mm | 8 – 30 |
| Forward reach from bar | 20 mm | 5 – 60 |
| Hook depth below bar centre | 30 mm | 15 – 80 |
| Hook bend radius | 9 mm | 5 – 20 |
| Grip along lower front face | 10 mm | 4 – 18 |
| Back lip length | 3 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS
Aerodynamic Drone Propeller
i wante more aerodynamic
STEPSTLGLB12 PARAMS