22RE to T3 Turbo Manifold Adapter

1 views

Bounding box: 130 × 66 × 105 mm
Engine: 3D Printing B-rep
Parameters: 23
Published: November 10, 2026

Download

Free to download and use. See the terms.

The prompt

I want to design a turbo manifold to suit a Toyota 22re exhaust manifold to a t3 garret style turbo inlet.

Parameters

Name	Value	Range
Engine flange width	130 mm	80 – 180
Engine flange depth	55 mm	40 – 100
Engine flange thickness	12 mm	6 – 20
Engine port bore	24 mm	16 – 40
Port center spacing	28 mm	20 – 40
Collector log outer diameter	58 mm	40 – 90
Collector wall thickness	5 mm	3 – 12
Runner outer diameter	32 mm	20 – 50
Runner wall thickness	4 mm	2 – 8
T3 flange width	110 mm	80 – 140
T3 flange depth	66 mm	50 – 100
T3 flange thickness	12 mm	6 – 20
T3 port width	44 mm	30 – 60
T3 port depth	32 mm	24 – 50
T3 port corner radius	8 mm	2 – 15
T3 bolt hole diameter	8.4 mm	6 – 10
T3 bolt half-spacing X	43 mm	30 – 55
T3 bolt half-spacing Y	23.5 mm	15 – 30
Engine flange bolt hole diameter	9 mm	6 – 12
Engine bolt inset	8 mm	6 – 25
Collector log length	120 mm	80 – 180
Runner height to log center	54 mm	30 – 100
T3 neck height above log	10 mm	4 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS