21x21 Commercial Prep Sink

1 views

Bounding box: 573.4 × 633.4 × 1091.4 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

bowl depth 12inches, the area of the bowl should be 21x21 inches and the overall heiaght including the legs should be 41 inches and you can remove the faucet from the part

Parameters

Name	Value	Range
Overall width - bowl is 21 in wide	573.4 mm	400 – 1200
Overall depth - bowl is 21 in deep	633.4 mm	400 – 1200
Rim height incl. legs (41 in)	1041.4 mm	600 – 1300
Bowl depth (12 in)	304.8 mm	100 – 450
Bowl bottom thickness	5 mm	2 – 12
Front rim width	20 mm	8 – 60
Side rim width	20 mm	8 – 60
Rear faucet deck depth	80 mm	30 – 200
Backsplash height	50 mm	0 – 150
Backsplash thickness	20 mm	6 – 40
Leg outside diameter	32 mm	12 – 60
Leg inside diameter	24 mm	6 – 50
Leg center inset from edges	60 mm	20 – 150
Foot pad diameter	48 mm	20 – 80
Foot pad height	8 mm	2 – 20
Shelf height above floor	250 mm	80 – 500
Shelf thickness	15 mm	4 – 30
Drain hole diameter	50 mm	20 – 100
Drain flange diameter	80 mm	30 – 150
Drain flange thickness	3 mm	1 – 10
Drain pipe diameter	45 mm	20 – 100
Drain pipe length below bottom	40 mm	10 – 200

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS