Everything else
21V Dock Enclosure - Blank Adapter Interface
- Bounding box
- 100.0 × 70.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 55
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
phần để để trống lỗ tôi gắn để chuyển riêng
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (X) | 100 mm | 50 – 200 |
| Body Depth (Y) | 70 mm | 40 – 160 |
| Body Height (Z) | 45 mm | 20 – 120 |
| Wall Thickness | 2.5 mm | 1.2 – 6 |
| Outer Corner Radius | 4 mm | 0.5 – 15 |
| Inner Fillet Radius | 3 mm | 0.5 – 12 |
| Standoff Diameter | 7 mm | 3 – 12 |
| Heat-Set Insert Hole Dia | 4.2 mm | 2 – 8 |
| Insert Hole Depth | 6 mm | 2 – 15 |
| Dock Screw Spacing (X) | 60 mm | 10 – 150 |
| Dock Screw Offset From Front | 10 mm | 3 – 40 |
| Dock Length (Y) | 45 mm | 20 – 120 |
| Dock Plate Width (X) | 70 mm | 30 – 180 |
| Dock Plate Thickness | 3 mm | 1.5 – 10 |
| Dock Screw Hole Dia | 3.4 mm | 1.5 – 8 |
| Guide Rail Width | 4 mm | 1 – 12 |
| Guide Rail Height | 4 mm | 1 – 12 |
| Latch Catch Width | 16 mm | 4 – 40 |
| Latch Catch Length | 8 mm | 2 – 30 |
| Latch Catch Depth | 3 mm | 1 – 10 |
| Latch Catch Offset From Front | 8 mm | 1 – 30 |
| Contact Slot Width | 6 mm | 1 – 20 |
| Contact Slot Length | 8 mm | 1 – 25 |
| Contact Slot Spacing | 12 mm | 2 – 40 |
| Contact Slot Offset From Front | 10 mm | 1 – 35 |
| Blank Adapter Window Width (X) | 30 mm | 5 – 120 |
| Blank Adapter Window Length (Y) | 14 mm | 5 – 80 |
| Adapter Window Centre Offset (Y) | 8 mm | -40 – 40 |
| Blank Adapter Hole Dia | 3.4 mm | 1.5 – 8 |
| Adapter Hole Spacing (X) | 50 mm | 10 – 150 |
| Adapter Hole Spacing (Y) | 20 mm | 8 – 100 |
| Bezel Cutout Width | 60 mm | 10 – 160 |
| Bezel Cutout Height | 26 mm | 6 – 90 |
| Bezel Recess Depth | 3 mm | 0.5 – 10 |
| Bezel Centre Height | 26 mm | 5 – 110 |
| Display Window Width | 48 mm | 5 – 150 |
| Display Window Height | 16 mm | 4 – 80 |
| Banana Jack Hole Dia | 8.2 mm | 4 – 14 |
| Banana Jack Spacing | 30 mm | 8 – 90 |
| Banana Jack Height | 26 mm | 4 – 110 |
| XT60 Cutout Length | 20 mm | 5 – 60 |
| XT60 Cutout Height | 12 mm | 4 – 40 |
| XT60 Cutout Height (Z) | 22 mm | 4 – 110 |
| XT60 Cutout Offset (Y) | 0 mm | -50 – 50 |
| XT60 Screw Hole Dia | 2.7 mm | 1 – 6 |
| XT60 Screw Spacing | 26 mm | 5 – 80 |
| Vent Slot Count | 6 pcs | 1 – 20 |
| Vent Slot Width | 3 mm | 1 – 12 |
| Vent Slot Height | 20 mm | 3 – 80 |
| Vent Slot Pitch | 6 mm | 2 – 30 |
| Vent Bank Offset (Y) | 5 mm | -60 – 60 |
| Vent Bank Height (Z) | 22 mm | 4 – 110 |
| Cover Thickness | 3 mm | 1.5 – 10 |
| Cover Locating Lip Height | 3 mm | 1 – 12 |
| Cover Screw Hole Dia | 3.2 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm