Loading the interactive model…
Interactive 3D model of Изящный крючок на ромбовидную перекладину 21 мм с защёлкойEverything else
Изящный крючок на ромбовидную перекладину 21 мм с защёлкой
1 views
- Bounding box
- 68.8 × 76.1 × 16.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Изящный крючок в стиле Normann Curve на квадратную перекладину 21 мм, повернутую ромбом. Сзади защёлка, чтобы не соскакивал. Плавное скругление краёв без ступенек.
Parameters
| Name | Value | Range |
|---|---|---|
| Bar square side | 21 mm | 15 – 40 |
| Fit clearance | 0.4 mm | 0 – 1.5 |
| Hook width | 16 mm | 10 – 30 |
| Clamp wall thickness | 4.5 mm | 3.5 – 8 |
| Stem thickness | 7 mm | 5 – 12 |
| Thickness at the bend | 8.5 mm | 5 – 14 |
| Tip distance in front of the bar | 30 mm | 18 – 60 |
| Hook bottom below bar centre | 52 mm | 35 – 100 |
| Grip along lower front face | 12 mm | 6 – 18 |
| Back latch undercut | 1.5 mm | 0 – 3 |
| Edge rounding | 1.6 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
STEPSTLGLB22 PARAMS
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
STEPSTLGLB20 PARAMS
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
STEPSTLGLB4 PARAMS
Aerodynamic Drone Propeller
i wante more aerodynamic
STEPSTLGLB12 PARAMS