Everything else
20deg Tapered U-Chute Platform (wide end low, tall sides)
- Bounding box
- 240.6 × 220 × 169.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
so basically I need you to flip it and have the wider side to be on the bottom and build up the sides to be about 3 inches tall
Parameters
| Name | Value | Range |
|---|---|---|
| Channel width at wide low end - 9in | 228.6 mm | 50 – 300 |
| Channel width at narrow high end - 4in | 101.6 mm | 30 – 290 |
| Horizontal run of the platform | 220 mm | 100 – 500 |
| Platform incline from horizontal | 20 deg | 0 – 45 |
| Channel depth below the surface | 25 mm | 5 – 80 |
| Channel floor corner radius | 10 mm | 2 – 40 |
| Material width beside the channel | 6 mm | 2 – 30 |
| Material under the channel floor | 8 mm | 3 – 30 |
| Total chute depth from floor to wall top - 3in | 76.2 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm