20deg Tapered U-Chute Platform

1 views

Bounding box: 240.6 × 220 × 115.2 mm
Engine: 3D Printing B-rep
Parameters: 8
Published: November 8, 2026

Download

Free to download and use. See the terms.

The prompt

I need a flat platform that has a u shaped channel that funnels down from 9 inches to 4 and it sits at a 20 degree angle

Parameters

Name	Value	Range
Channel width at wide (high) end - 9in	228.6 mm	50 – 300
Channel width at narrow (low) end - 4in	101.6 mm	30 – 290
Horizontal run of the platform	220 mm	100 – 500
Platform incline from horizontal	20 deg	0 – 45
Channel depth below the surface	25 mm	5 – 80
Channel floor corner radius	10 mm	2 – 40
Material width beside the channel	6 mm	2 – 30
Material under the channel floor	8 mm	3 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS