Everything else
200mm Amp Chassis Internal Layout
- Bounding box
- 200.0 × 200.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
3D等距技术布局示意图，200×200×200mm方形机箱内部，透明线框外壳，展示功放内部元件最佳布局。底层Z=0中心放置环形变压器，直径90mm、高60mm，四周边距55mm；底层左前角放置EMI板12×12mm，左边距15mm、前边距15mm，不与环牛重叠。中层高度Z=95mm：正前方放置功放板，宽120mm、长110mm，前边距15mm，左右边距40mm；正后方同层放置软启动板，长150mm、宽40mm，后边距15mm，左右边距25mm；功放板与软启动板之间留20mm间隙。最高层Z=185mm放置小主板170×170mm，距顶层15mm，四周边距15mm，主板接口和端子集中在左侧，朝左壁，不超出左边距。所有元件无干涉、无重叠、层次清晰，带尺寸标注、引出线和边距标注。风格：CAD工程图+3D渲染，半透明PCB板，蓝、绿、红、紫区分不同板卡，白色干净背景，等距俯视，轻透视，高细节，锐利线条，技术插画，高质量。
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Cube Size | 200 mm | 100 – 400 |
| Wall Thickness | 2 mm | 0.5 – 5 |
| Standoff Diameter | 6 mm | 3 – 12 |
| Mid Layer Height (Z) | 95 mm | 20 – 190 |
| PCB Thickness | 1.6 mm | 0.8 – 4 |
| Mounting Hole Dia | 3.2 mm | 2 – 8 |
| Toroid Outer Dia | 90 mm | 40 – 160 |
| Toroid Height | 60 mm | 20 – 120 |
| Toroid Centre Bore | 30 mm | 5 – 70 |
| EMI Board Size | 12 mm | 10 – 40 |
| EMI Left/Front Margin | 15 mm | 5 – 60 |
| Amp Board Width (X) | 120 mm | 60 – 180 |
| Amp Board Length (Y) | 110 mm | 50 – 170 |
| Amp Side Margin | 40 mm | 10 – 80 |
| Amp Front Margin | 15 mm | 5 – 60 |
| Heatsink Height | 25 mm | 8 – 60 |
| Filter Cap Diameter | 22 mm | 8 – 40 |
| Filter Cap Height | 35 mm | 10 – 70 |
| Soft-Start Board Width (X) | 150 mm | 60 – 180 |
| Soft-Start Board Length (Y) | 40 mm | 20 – 100 |
| Soft-Start Side Margin | 25 mm | 5 – 60 |
| Soft-Start Rear Margin | 15 mm | 5 – 60 |
| Relay Height | 20 mm | 8 – 40 |
| Motherboard Size | 170 mm | 100 – 190 |
| Motherboard Margin | 15 mm | 5 – 40 |
| Gap To Lid | 15 mm | 5 – 60 |
| Left-Side Connectors | 4 pcs | 2 – 5 |
| Connector Height | 8 mm | 3 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm