Everything else
20工位棘轮齿轮一体件
- Bounding box
- 44.0 × 44.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
创建津上B0385C走心机20工位棘轮齿条接料盘装配模型，单位mm，可导出STEP。 零件清单： 1.尼龙料盘Φ375，20格扇形槽均布，底面20个定位凹坑； 2.棘轮齿轮一体件，内孔带滚针轴承，端面螺纹孔固定棘爪摆臂； 3.棘爪摆臂带扭簧，单向驱动棘轮； 4.直齿条，匹配齿轮，尾部连接CQ2B32×20薄型气缸； 5.AXK2542推力轴承25*42*4； 6.M8×25不锈钢定位波珠； 7.中心阶梯芯轴，钢板底座框架，二位三通DC24V电磁阀、螺钉挡圈等标准件。 装配顺序：底座→推力轴承→棘轮齿轮总成→塑料料盘。 动作：气缸伸出齿条推齿轮转18°，气缸回缩棘爪打滑，料盘不动；波珠定位锁止。 要求：独立零件、装配约束完整、无干涉，输出STEP AP214。
Parameters
| Name | Value | Range |
|---|---|---|
| 模数 | 2 mm | 0.5 – 10 |
| 齿数 | 20 count | 5 – 60 |
| 齿宽 | 12 mm | 2 – 40 |
| 中心孔径 | 8 mm | 2 – 30 |
| 端面安装孔数 | 3 count | 2 – 6 |
| 安装孔分布圆直径 | 20 mm | 10 – 60 |
| 安装孔直径 | 4.2 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm
Aerodynamic Drone Propeller
i wante more aerodynamic