Gears and transmission
2-Stage Spur Gear Reduction Set (10:1)
- Bounding box
- 169.5 × 92.9 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 14-tooth pinion driving a 60-tooth gear (3:1). Stage 2: A 14-tooth pinion coupled to a 60-tooth gear (3.33:1). Module: 1.5 mm. Pressure angle: 20 degrees. Face width (gear thickness): 20 mm. Central shaft bore: 10 mm diameter with a 0.2 mm 3D-printing tolerance. Include standard involute tooth profiles with a 0.25 mm backlash clearance between meshing teeth. Flat base on one side for bed adhesion without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1.5 mm | 0.5 – 5 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Face Width (thickness) | 20 mm | 5 – 40 |
| Bore Diameter (incl. 0.2 mm tolerance) | 10.2 mm | 5 – 30 |
| Backlash Clearance | 0.25 mm | 0 – 1 |
| Stage 1 Pinion Teeth | 14 teeth | 8 – 40 |
| Stage 1 Gear Teeth | 60 teeth | 20 – 120 |
| Stage 2 Pinion Teeth | 14 teeth | 8 – 40 |
| Stage 2 Gear Teeth | 60 teeth | 20 – 120 |
| Lightening Hole Count | 3 holes | 0 – 6 |
| Lightening Hole Diameter | 10 mm | 2 – 20 |
| Lightening Hole PCD | 32 mm | 15 – 50 |
| Index Hole Diameter | 3 mm | 1 – 6 |
| Index Hole PCD | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled