Everything else
2-Piece ESP32-CAM Gantry Mount
- Bounding box
- 52.7 × 35.2 × 51.4 mm
- Engine
- Precision B-rep
- Parameters
- 47
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
modifier la structure utiliser juster 2 pieces
Parameters
| Name | Value | Range |
|---|---|---|
| PCB Width | 27 mm | 20 – 40 |
| PCB Length | 40.5 mm | 30 – 60 |
| PCB Thickness | 1.6 mm | 1 – 3 |
| PCB Clearance | 0.5 mm | 0.1 – 1.5 |
| Wall Thickness | 2 mm | 1.2 – 4 |
| Case Depth | 9 mm | 6 – 18 |
| Outer Corner Radius | 2 mm | 0 – 4 |
| Snap Lip Thickness | 1.5 mm | 1 – 3 |
| Lens Hole Diameter | 8.5 mm | 6 – 15 |
| Lens Chamfer | 1.5 mm | 0.5 – 3 |
| Flash LED Width | 4 mm | 2 – 8 |
| Flash LED Height | 4 mm | 2 – 8 |
| Flash Offset Y | 10 mm | 5 – 16 |
| Wire Slot Width | 10 mm | 6 – 18 |
| Wire Slot Height | 4 mm | 2 – 8 |
| Antenna Notch Width | 14 mm | 8 – 22 |
| Snap Clip Width | 6 mm | 3 – 12 |
| Snap Clip Offset Y | 10 mm | 4 – 16 |
| Lock Pin Hole Dia | 3 mm | 2 – 4 |
| Vent Slots Count | 4 | 0 – 8 |
| Vent Hole Diameter | 2.5 mm | 1.5 – 4 |
| Case Pivot Ear Thickness | 3 mm | 2 – 6 |
| Case Pivot Ear Width | 8 mm | 5 – 14 |
| Case Pivot Ear Height | 10 mm | 6 – 16 |
| Case Pivot Hole Dia | 4.2 mm | 3 – 6 |
| Pivot Axis Offset Z | 5 mm | 2 – 12 |
| Profile Width | 20 mm | 20 – 40 |
| Top Plate Length | 45 mm | 30 – 70 |
| Clamp Bracket Width | 20 mm | 15 – 35 |
| Clamp Plate Thickness | 4 mm | 2.5 – 6 |
| Drop Arm Length | 35 mm | 20 – 60 |
| M5 Slot Width | 5.5 mm | 4 – 6.5 |
| M5 Slot Length | 12 mm | 6 – 20 |
| Grip Rib Width | 2 mm | 1 – 4 |
| Grip Rib Height | 1.5 mm | 0.8 – 3 |
| Drop Arm Slot Width | 4.5 mm | 3 – 6 |
| Drop Arm Slot Length | 15 mm | 8 – 25 |
| Bracket Clevis Extension | 16 mm | 10 – 25 |
| Bracket Ear Thickness | 4 mm | 2.5 – 6 |
| Bracket Ear Height | 14 mm | 8 – 20 |
| Bracket Ear Offset Y | 15 mm | 10 – 25 |
| Bracket Pivot Hole Dia | 4.2 mm | 3 – 6 |
| M4 Nut Across-Flats | 7 mm | 5.5 – 9 |
| M4 Nut Pocket Depth | 3 mm | 1.5 – 5 |
| Show Assembled | 1 | 0 – 1 |
| Camera Tilt Angle | 15 deg | -10 – 35 |
| Exploded Layout Gap | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm