Brackets and mounts
2-Finger Parallel Jaw Pneumatic Gripper Assembly
- Bounding box
- 175.0 × 80.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD assembly of a 2-finger parallel jaw industrial gripper for robotic applications. The model must consist of a main mounting base frame, two symmetric sliding jaw fingers with replaceable gripping pads, internal guide rails, and a central pneumatic/lead-screw actuation interface. Ensure clean geometry with smooth fillets and chamfers on edges. Apply a two-tone industrial color scheme: bright yellow for the movable finger jaws and dark industrial blue for the main base body structure.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 120 mm | 80 – 180 |
| Base Width | 80 mm | 60 – 120 |
| Base Height | 60 mm | 40 – 100 |
| Base Wall Thickness | 6 mm | 3 – 12 |
| Base Chamfer Radius | 2 mm | 0 – 4 |
| Cylinder Diameter | 25 mm | 16 – 40 |
| Cylinder Length | 60 mm | 40 – 100 |
| Piston Rod Diameter | 8 mm | 6 – 16 |
| Piston Rod Length | 25 mm | 10 – 60 |
| Guide Rail Length | 80 mm | 50 – 120 |
| Guide Rail Width | 15 mm | 10 – 25 |
| Guide Rail Height | 10 mm | 6 – 20 |
| Jaw Finger Length | 100 mm | 60 – 150 |
| Jaw Finger Width | 25 mm | 15 – 40 |
| Jaw Finger Height | 20 mm | 12 – 35 |
| Jaw Fillet Radius | 3 mm | 0 – 8 |
| Jaw Closed X Offset | 50 mm | 20 – 90 |
| Gripping Pad Length | 80 mm | 40 – 130 |
| Gripping Pad Width | 20 mm | 10 – 35 |
| Gripping Pad Thickness | 3 mm | 1.5 – 6 |
| Closed Pad Gap | 12 mm | 4 – 40 |
| Y-Connector Length | 40 mm | 25 – 70 |
| Y-Connector Width | 30 mm | 20 – 50 |
| Y-Connector Height | 15 mm | 8 – 30 |
| Connector Fork Depth | 12 mm | 6 – 25 |
| Robot Flange Diameter | 60 mm | 40 – 100 |
| Robot Flange Thickness | 15 mm | 8 – 25 |
| Flange Bolt Circle Diameter | 45 mm | 30 – 80 |
| Flange Bolt Hole Diameter | 6 mm | 4 – 12 |
| Flange Bolt Count | 4 | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent