Brackets and mounts
1U 10-inch Rack Enclosure for Fritzbox 7530ax PCB
- Bounding box
- 254.0 × 163.0 × 44.5 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
I need a custom-fit enclosure for the Fritzbox 7530ax that simultaneously serves as a 1U rack mount for a 10-inch rack. The Fritzbox will be disassembled so that the plastic housing is removed, leaving only the PCB, which must fit into the rack enclosure. The PCB will lie flat inside the enclosure. The Fritzbox ports (LAN and DSL) must face forward, be surrounded by a frame, and be integrated flush into the front panel. Additionally, the PCB needs to be screwed to the enclosure. The side ports must also remain accessible. The enclosure must fully enclose the Fritzbox PCB but leave enough space for heat dissipation. For this purpose, ventilation slots must be integrated across the entire surface areas of both side walls and the back wall."
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 254 mm | 200 – 280 |
| Enclosure Depth | 160 mm | 100 – 240 |
| Enclosure Height (1U) | 44.45 mm | 30 – 60 |
| Side Wall Thickness | 2.5 mm | 1.5 – 5 |
| Floor Thickness | 3 mm | 1.5 – 6 |
| Back Wall Thickness | 2.5 mm | 1.5 – 5 |
| Rack Hole Spacing (Horizontal) | 236.5 mm | 180 – 260 |
| Rack Screw Hole Diameter | 5 mm | 3 – 8 |
| Front Port Opening Width | 120 mm | 40 – 210 |
| Front Port Opening Height | 22 mm | 8 – 34 |
| Front Port Opening Centre Height | 22 mm | 10 – 36 |
| Port Frame Width | 3 mm | 1 – 8 |
| Side Port Opening Length | 28 mm | 8 – 60 |
| Side Port Opening Height | 12 mm | 4 – 30 |
| Side Port Centre Height | 22 mm | 8 – 38 |
| PCB Mount Spacing (X) | 170 mm | 40 – 230 |
| PCB Mount Spacing (Y) | 95 mm | 30 – 140 |
| PCB Standoff Boss Diameter | 7 mm | 4 – 14 |
| PCB Screw Pilot Hole Diameter | 2.8 mm | 1.5 – 5 |
| PCB Standoff Height | 8 mm | 3 – 25 |
| Vent Slot Length | 8 mm | 3 – 20 |
| Vent Slot Height | 3 mm | 1.5 – 8 |
| Vent Rows per Wall | 3 pcs | 1 – 8 |
| Vent Columns per Wall | 10 pcs | 3 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu