Everything else
1D Beam Element Model
- Bounding box
- 140 × 24.4 × 59.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
remove the locating pin and support pad
Parameters
| Name | Value | Range |
|---|---|---|
| Beam length | 140 mm | 80 – 240 |
| Beam width | 18 mm | 10 – 50 |
| Beam height | 12 mm | 6 – 30 |
| Support span, centre to centre | 100 mm | 40 – 200 |
| Support height to beam underside | 26 mm | 15 – 60 |
| Support base width | 34 mm | 20 – 80 |
| Support base plate height | 4 mm | 2 – 10 |
| Support top seat width | 12 mm | 6 – 30 |
| Roller diameter | 8 mm | 4 – 16 |
| Load offset from midspan | 0 mm | -35 – 35 |
| Arrow plug diameter | 4 mm | 3 – 8 |
| Arrow head height | 8 mm | 4 – 20 |
| Arrow head diameter | 12 mm | 6 – 30 |
| Arrow shaft length | 14 mm | 6 – 40 |
| Arrow fin height | 7 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm